Situational plan of a land plot for gasification sample. Situational plan of the land: the cost of our services
Special documentation in the form of a request and other confirmations from the Gas Service is not required. Authorized executors have this information. But if gas delivery to the indicated address is not planned in the near future, the preparation of the document may be rightfully refused.
Also, the refusal can be associated with objective reasons. For example, the notified body does not provide such a service. In this case, you can contact commercial organizations that will provide this service. But here, too, problems may arise if the binding to the terrain is not drawn. This can happen if the surrounding context does not have access to gas mains, that is, the surrounding area is not supplied with gas.
Step-by-step instructions for obtaining a situational memory plan
To get a situational plan of a land plot for gasification, you should:
- Go to the local administration, to the department of land management.
- Write an application on a form or in free form - in accordance with the current regulations.
- Attach documentation for buildings, if any, or a certificate from Rosreestr about their absence.
- Attach from the land survey plan and.
- After presenting a civil passport, submit an application and make sure that it is registered.
Under the optimal course of circumstances, the situational plan of the land plot for gasification will be issued in a finished form about a month after being accepted into production. It does not need to be approved by other authorities - all the required information will be entered into it.
Each owner of a land plot (ZU) among the documentation must have a cadastral plan with a schematic representation of the site and an indication of its main technical characteristics. However, a technical passport is not the only document required to give an idea of private ownership. In many cases, the land owner may need a situational plan for the land.
What is a situational plan of a land plot
A situational plan is a contour diagram of a site with the definition of its boundaries and relative coordinates. It makes it clear where the site is located, and what objects are located on its territory and nearby.
Objects include:
- objects of natural origin: trees, forest, river, water sources, etc.;
- buildings and technical structures (houses, security facilities, water towers, wells, power plants, etc.);
- communications (gas pipelines, water pipes, sewerage systems, power grids).
What does contour diagram mean?
Contour diagrams are drawn on a large scale without small details: usually a scale from 1: 2000 to 1: 500. Objects on them are indicated schematically, indicating all the necessary characteristics: for example, the number of floors, area, type of premises (residential / non-residential), basic building materials are indicated for premises. To draw up a situational plan, a non-topographic survey method is used:
- method of polar coordinates;
- serif or bipolar coordinate method;
- method of measurements;
- bypass method.
Examples of outline plans are city maps and sports maps.
When a plot layout is needed
A contour plan of a land plot may be required in the following situation:
- when buying / selling memory;
- before starting the construction of your house on the site: in this case, a construction project is drawn up, to which a situational plan is attached;
- when laying communication lines through the memory;
- with major redevelopment of fundamental buildings, replacement or installation of new equipment.
Where can I get a situational site plan
A situational contour plan is made by specialists from land management departments, construction or architectural institutions, technical experts, and surveyors. Accordingly, you can order it in the above-mentioned authorities.
- If construction or redevelopment is underway, then it is better to order a plot of the site from the city architectural department, since in any case, the approval of construction or redevelopment projects from the architect will be required.
- When conducting gas pipelines, water pipelines, electrical cables, the situational plan must necessarily indicate technical diagrams with characteristics (pipe diameters, materials, cross-sectional area and marking of wires, types of meters, valves and other equipment). In this case, it is necessary to involve additional specialists in gas, water supply and electrical equipment in the preparation of the joint venture.
To order a plan, you need to contact the institution:
- with a statement;
- passport;
- a document of title to a land plot (purchase / sale, donation, lease, inheritance agreement).
How much is a situational plan of a land plot
- On average, a contour diagram of a memory device on a scale of 1: 2000, ordered from a government institution, for an individual will cost 5 thousand rubles.
- For legal entities, the prices are completely different and depend on the area of the site: the cost of drawing up a plan for one land hectare is 10 thousand rubles.
- There are also private firms with a wide range of services for land owners. The cost of work on drawing up a situational plan of a land plot in them is slightly more expensive (on average, by 500 - 1000 rubles)
Comparison of the situational and topographic plan
Although the situational plan (SP) of the area is often called topographic, it does not belong to topographic because of the survey method used.
In addition, there are other differences between a situational diagram and a topographic map (TC):
- The SP scale is larger (up to 1: 5000 inclusive), the TC scale is smaller (up to 1:10 000). (Military topographic maps of a larger scale (up to 1:50 000) are deciphered in parts).
- The topographic map marks the relief of the area, the situational one does not.
- On the situational plan, only the direction to Nord (north), the planned coordinates and the kilometer grid are indicated. On the TC - the exact geographic coordinates are indicated, not only the kilometer, but also the degree grid (to determine the latitude and longitude) is plotted.
- The topographic map can be used for military purposes to inflict a pinpoint strike. It is impossible to apply the situational scheme for such purposes.
- Situational schemes are not secret, although they are intended for official use. Until recently, topographic maps were classified under strict secrecy.
- Almost all objects are indicated on the joint venture, even single and temporary objects - in this regard, situational plans are more detailed. For example, a diagram can show a lonely tree, a temporary hut, or a vegetable garden. Tomorrow they can cut down the tree, demolish the temporary hut, and dig up the garden. Therefore, you will not see these objects on a topographic map, but there are only permanent landmarks: capital buildings, railways, roads, gas pipelines, oil pipelines, important technical objects.
How else can you get a situational plan of a land plot
- The easiest way is to make an application through Rosreestr. Disadvantage - high quality and detail of the scheme is not guaranteed. But on the other hand, there is no need to additionally approve the plan in other institutions.
- Using Google or Yandex maps, which are compiled using satellites that survey from space orbit. Disadvantages: the quality of the map can also be low; such a scheme will need to be certified by an architect or a land management specialist.
But we will fix the first flaw!
You can improve the quality of the map using the SAS Planet program. But it will give an error of up to 60 cm for every 100 m. You can make a correction using another application - Global Mapper.
Thus, modern information technologies today make it possible for each landowner to make a situational plan of a land plot, sitting at a monitor, without land surveyors and other specialists conducting surveys on the ground.
Considering the general principles of design and construction, we were faced with questions regarding the main differences between the construction master plan and the situational plan. In this connection, we decided to tell our readers about what we call a master plan and what is situational. A master plan is a project document, which is a drawing with the location of a construction object. The master plan is fully aligned with the projected object, land plot and architectural structures located on it, both in the territory of the whole city and in a separate region. As a rule, the master plan is executed in a large-scale image (1: 1000, 1: 500, sometimes 1: 200) by graphically superimposing a drawing of the designed object on a topographic, engineering-topographic or photographic plan of the territory. In a working project, a master plan is a drawing that shows the location of a construction object and improvement elements of a nearby area. Differences between a building master plan and a situational plan begin with large-scale execution. The scale of the situational plan is usually 1: 2000. In addition, a situational plan is a blueprint that shows:
The main differences between the construction master plan and the situational plan lie in their development. If the master plan is made on the basis of calculations, then the situational plan, to a greater extent, acquaints us with the construction conditions. General plan - is developed in a comprehensive manner and is a mandatory document for a construction organization project (PIC). Situational plan - in some cases, it is not used at all. Master plan - ensured by compliance with fire and sanitary and hygienic construction standards. Situational plan - based on guidelines that define its content and form. General plan - roughly defines the transport schemes, the location of the main facilities and temporary ones, therefore, in some cases, it is drawn up sequentially for each stage of work. Situational plan - designed to create a digital terrain model and does not need a phased implementation. As you can see, the differences between the building master plan and the situational plan are so tangible that there is no point in considering their specifics further. Unless you dare to find out more, based on the specific conditions of the project. In this case, call or write to us! We will be happy to answer all your questions and tell you about the preparation of project documentation, regarding all of its sections!
In order to correctly present the differences between the construction master plan and the situational plan, we moved away from the design language and tried to present the material in an accessible form for the reader. But we consider it necessary to emphasize that the drawing up of the master plan is regulated by SNiP 3.01.01-85 and is determined by the specific volume of general construction work. The situational plan is drawn up on the basis of planning projects for the construction area and engineering survey materials. You can read more about engineering surveys in the corresponding section of the "Construction Encyclopedia". Note that when performing the situational plan, a topographic survey is not required, since only buildings, structures, roads and other similar landmarks are marked on it. If the customer cannot do without a master plan, then the presence of a situational plan is very important in the construction of residential and agricultural facilities. Therefore, if you are planning to build a metal building or structure, first, share your ideas with a designer who will help you decide on the composition of design and working documentation, valuable, deadlines, construction, engineering and design solutions that are optimal for your ideas!
Some differences between the construction master plan and the situational plan are not indicated in this article. Much here depends on the specific specifics of the activity of your construction project. Therefore, we are waiting for your calls to talk in more detail about the upcoming design!
We have been working since 2007
Own accredited laboratory
The whole range of environmental services
Completed 520 objects
It's a pleasure to work with us
Perfect service!
Price: from 12,000 r
A situational plan of a land plot is a graphic document resembling a topographic map in structure. This is a diagram showing the characteristics of the territory. A free-form drawing is created, therefore, this document cannot be the basis for the construction design.
There is a lot of information on the network about where you can get a situational plan for a land plot in Moscow. Some, who do not know where to order a situational plan of a land plot, try to make it on their own. We recommend not to “invent a bike” and use our services. Agree, you are unlikely to be able to correctly indicate the location of communications and other items on paper, without losing the accuracy and parameters of the houses. To draw up a situational plan in the Moscow region correctly, you need special equipment and an understanding of geodesy.
Important! If you do not know who makes the situational plan of the land, contact us.
Situational plan of the land plot for power grids
Situational plan of a land plot for power grids - a drawing on which we indicate:
- connection points;
- place of tie-in (source of electricity supply: poles, substations).
The situational plan of the land plot for electrical networks, executed by our employees, contains information on how the circuits are connected to each other, where the electricity comes from. On the diagram, the position of the power grids is indicated in the form of lines. Without fail, we indicate the type of protection, the location of the grounding, the characteristics of the cables, their diameter.
If you do not know who issues the situational plan of the land plot, please contact our company. We use modern geodetic equipment, which is regularly checked for serviceability. Our experts guarantee the accuracy of the information in the technical report.
Important! You will need to obtain a situational plan of the area for connecting the electrical networks.
In order to use the services of the ISK ISK company, you need to have documents confirming your ownership and to voice the exact purpose of the research by our engineers.
We usually draw up a situational plan of a land plot on a scale of 1: 2000. There are times when it is necessary to draw up a diagram of a large area, for example, a village. In such cases, we use a scale of 1: 5000.
How we create a situational plan: from order to technical conclusion
The development of a situational plan in our company is carried out according to a certain algorithm. To draw up the location of the land plot, we divide the work into three stages:
- preparation (we draw up a contract, calculate the cost of services, study the features of the technical assignment and existing documentation);
- field (we go to the object, we make a connection to the state geodetic network, we take measurements of the terrain);
- office (we process the received data, draw up graphic documents);
After observing and processing the results, our engineers draw up a technical report. We include a description in it:
- about the location of the object (name of the city, street);
- terrain features (roads, buildings, indicating the number of floors, landfills, reservoirs, parking lots, factories, communications);
- information about the contractor (surname, signature of the head of the organization, seal).
For many years of work in the field of geodetic surveys, we have gained vast experience. Our specialists are highly qualified engineers. Thanks to an individual approach to each order, our customers are always satisfied with the measurement result and recommend us to others.
We carry out geodetic works based on:
- SRO admission, which allows solving problems in construction;
- relevant regulatory documents for geodesy;
- high level of qualifications of employees;
- work equipment certification.
Situational plan of the land: the cost of our services
The cost of the situational plan in Moscow, like other geodetic surveys, is calculated in our company individually. This is due to the special characteristics of each order. We calculate the cost for the situational plan of the site from the following factors:
- location;
- the distance from the tie-in point to the connection point;
- scope of work;
- the speed of work and the provision of results;
- availability of documents on observations of past years;
- built-up area;
- characteristics of the terrain.
Attention! In order to find out the approximate prices for the situational plan for your object - contact our employees.
Advantages of the company "Research MSK"
Experienced specialists work in our staff. We carry out any geodetic work:
- we control the stages of construction;
- we break the boundaries of land plots;
- we calculate the volume of earthworks;
- we carry out topographic surveys;
- we establish control points of the state geodetic network;
- we carry out observation of facades;
- we measure land areas;
- we make filming of communications (including underground).
Many do not know where to get a situational plan of a land plot in Moscow, drawn up with high quality in the shortest possible time. We recommend to contact us. When ordering our services, you will definitely receive:
- quick calculation of the cost of services;
- order fulfillment 2-3 days;
- research using modern certified equipment;
- detailed technical report;
- flexible prices for services;
- discounts when ordering complex geological and geodetic surveys;
- a report in a convenient format;
- qualitative research.
Trying to make your own situational plan of the area will turn out to be a waste of time for you. Use our services and get quality documentation.
If you have any questions, please contact us. Our specialist will advise you free of charge and calculate the approximate cost of services for you.
A situational plan is a graphic document that shows how a certain object is located in the landscape-planning and town-planning systems, and identifies its functional, compositional and transport links with other objects. On such plans, as a rule, a fairly large territory is depicted and its connection with the environment is shown. The plan also shows the connections between the object being built and other structures located in the city or village. The situational plan also includes images of the boundaries of sites and building lines, schematic images of the main structures. It contains information about the presence or absence of parking lots, the number of storeys of buildings, and the names of streets that are adjacent to the facility. Among other things, the situational plan includes a transport communications scheme.
The situational plan is usually not very precise, its scale is much smaller than the scale of the master plan. In other words, a situational plan is a diagram that clearly demonstrates the interaction of an object with the environment and contains all the necessary information about the nature of this interaction. However, the importance of this document should not be underestimated. The need for a situational plan arises when it is necessary to agree on the boundaries of a land plot, to carry out a transaction for the sale or purchase of a plot, and so on.
Our company will collect all the necessary data and prepare a clear, comprehensive situational plan, on which all objects of interest to you will be presented with maximum clarity. Rest assured: the calculations will be performed correctly, and all dimensions, designations and signatures will be applied in the right places. We are ready to guarantee literacy in the preparation and execution of the situational plan and the scrupulousness of the calculations.
Features of the situational plan
Such a plan in a schematic form reflects the position of any structure on the ground: its connections with communications, proximity to buildings, roads and man-made objects. The plan is based on a topographic survey containing information about all existing structures and their sizes.
The situational plan also contains inventory and insolation information. On the basis of the former, an analysis of its type and age can be made, on the basis of the latter, an analysis of the illumination of all possible parts of the object in different seasons of the year and times of day. These data are necessary for carrying out (in the future) work to improve the adjacent territories and modernize the structure. On plans of this kind, it is customary to mark both positive and negative viewpoints (highways, industrial enterprises, landfills). The plan contains two types of blocks: design and analytical. Both are based on graphic documentation (diagrams) and accompanying texts.
Schemes are required and optional. Schemes of systems (objects) of gas, heat, water, power supply, as well as a diagram of roads and other transport communications, a diagram of the use of the territory on which the object is located, and a diagram showing the boundaries of zones of negative influence of capital structures are considered mandatory.
Thus, the purpose of the situational plan is to create an idea of the location of a plot of land (or construction object) in relation to other plots (objects). To place an order for a situational plan, the client needs to tell us the cadastral number of the site or its address. This information is enough to draw up a comprehensive situational plan.