Legislative base of the Russian Federation. On the rules for confirming the suitability of new materials, products, structures and technologies for use in construction Decree of the Government of the Russian Federation 1636 of December 27, 1997
Earlier, if in these organizations, along with a monthly percentage bonus for work experience in structural divisions for the protection of state secrets, an allowance (remuneration) was established for length of service (continuous work), then one of the indicated allowances (remunerations) was paid to employees of structural units for the protection of state secrets. By Decree of the Government of the Russian Federation of April 2, 2002 N 209, this condition was declared invalid. Thus, now employees for the protection of state secrets are given a bonus for the length of service in these units, regardless of whether or not they are paid a bonus (remuneration) for length of service (duration of continuous work).
Is this employee being paid a monthly percentage increase on their official salary ( tariff rate) for work with information constituting state secret, during his absence - 19 working days? When granting, in accordance with Article 128 of the Labor Code of the Russian Federation, leave without saving wages(vacation at own expense) payment of wages, including the specified allowance, is not made. Subdivisions for the protection of state secrets Employees of structural subdivisions for the protection of state secrets of state authorities, enterprises, institutions, organizations and military units may, in addition to the monthly percentage bonus for working with classified information, receive a monthly percentage premium to the official salary (tariff rate) for the length of service. This is stated in the Decree of the Government of the Russian Federation of October 14, 1994 No.
No. 1639 dated 27 12 1997
BUDGET ACCOUNTING BUDGET REPORTING LAWS AND PRACTICE OTHER MATERIALS Money for state secrets S.I. Petrova, Adviser of the Department of Labor Relations of the Ministry of Health and Social Development of the Russian FederationCommissioned by an allowanceIn pursuance of the Law of the Russian Federation "On State Secrets" the Decree of the Government of the Russian Federation of October 14, 1994 No.
N 1161 “On the procedure and conditions for the payment of percentage bonuses to the official salary (tariff rate) of officials and citizens admitted to state secrets”.
An error occurred.
Russian Federation and transferred to mass (serial) production; requirements for the properties and conditions of use of which are completely or partially absent in the current building codes and regulations, state standards, technical conditions and other regulatory documents; mastered for the first time by production using foreign technologies, if it differs (in terms of materials, composition, design, etc.) from products of a similar purpose that meet the requirements of the current regulatory and technical documentation; manufactured in accordance with foreign norms and standards and supplied in accordance with the requirements of these norms and standards to the territory of the Russian Federation.
Money for state secrets
Thus, the work experience of employees of structural divisions for the protection of state secrets entitles them to receive a monthly percentage bonus to their official salary (tariff rate). This length of service includes the time of work in the structural units for the protection of state secrets, regardless of in which state authorities, enterprises, institutions, organizations, military units the employee worked or served.
At the same time, the length of service or service in these units must be documented. Breaks in work or service in the structural divisions for the protection of state secrets in the length of service or service to receive a monthly percentage allowance are not counted.
The head or commander of a public authority, local government, enterprise, military unit, a percentage allowance with information constituting a state secret is established, as a rule, higher authority. For heads of enterprises for which departmental subordination is not defined, this percentage premium is established by an employment contract or contract, taking into account the degree of secrecy of the work carried out by the enterprise.
Attention
Nuances When establishing a percentage allowance, it should be borne in mind that its payment is not suspended while the employee is on vacation (except for parental leave), a business trip, or in a medical institution. Example. The employee is given a monthly percentage bonus to the official salary (tariff rate) for working with information constituting a state secret, conditionally, 300 rubles per month.
Monthly allowance for length of service in cryptographic agencies Amount (calculation procedure) of payment (from the salary for a military position): military service by contract:
Normative legal acts:
- Decree of the Government of the Russian Federation of December 27, 1997 No. 1639;
- order of the Minister of Defense of the Russian Federation of April 11, 1998
Monthly allowance for military personnel with a higher legal education and holding military positions in a legal specialty Amount (calculation procedure) of payment (from the salary for a military position):
- occupying military positions in the central apparatus of the Ministry of Defense - 50 percent;
- holding military positions in military command and control bodies, types of the Armed Forces and branches of the Armed Forces, departments of military districts (fleets), regional command, associations -
- 30 percent;
- occupying military positions in the directorates of formations, military units and organizations of the Armed Forces - 15 percent.
Normative legal acts:
- Decree of the President of the Russian Federation of May 8, 2001
Decree of the Government of the Russian Federation of December 27, 1997 1639
- Order of the Minister of Defense of the Russian Federation of December 30, 2011 No.
Monthly additional payments Monthly allowance for length of service in cryptographic agencies Amount (calculation procedure) of payment (from the salary for a military position):
- with work experience up to 3 years (grade 2) - 5 percent;
- with work experience up to 3 years (grade 1) - 15 percent;
- with work experience from 3 to 6 years (grade 2) - 10 percent;
- with work experience from 3 to 6 years (grade 1) - 20 percent;
- with work experience of 6 years or more (grade 2) - 20 percent;
- with work experience of 6 years or more (grade 1) - 30 percent.
Normative legal acts:
- Decree of the Government of the Russian Federation of December 27, 1997
Decree of the Government of the Russian Federation of December 27, 1997 1639
- Decree of the Government of the Russian Federation of December 29, 2011 No. 1198;
- Order of the Minister of Defense of the Russian Federation dated December 30, 2011 No. 2700;
- order of the Minister of Defense of the Russian Federation of August 6, 2012 No. 2195;
- order of the Minister of Defense of the Russian Federation of September 18, 2015 No. 542.
Monthly allowance for work with information constituting a state secret Amount (calculation procedure) of payment (from the salary for a military position):
- military personnel undergoing military service under the contract:
- for work with information of "special importance" - 25 percent;
- for work with information "top secret" - 20 percent;
- for work with "secret" information - 10 percent.
Normative legal acts:
- Federal Law of November 7, 2011
A technical certificate is a document authorizing the use of new products in construction on the territory of the Russian Federation, provided that they comply with the requirements specified in the certificate. The technical certificate is issued taking into account the mandatory requirements of construction, sanitary, fire, industrial, environmental, as well as other safety standards approved in accordance with applicable law.
Information on changes: Decree of the Government of the Russian Federation of January 5, 2015 N 9 amended clause 5 See the text of the clause in the previous version 5.
Content:
- An error occurred.
- Monthly extra payments
- Gg 1639 dated 27 12 1997
An error occurred.
Important
Bodies of state non-departmental expertise of projects and estimates and bodies of state architectural and construction supervision control the availability of technical certificates for new products used in the design and construction, as well as their compliance with the requirements of a technical certificate. 10. For the use of new products in construction without a technical certificate, the guilty persons are held liable in accordance with the legislation of the Russian Federation.
Information on changes: Decree of the Government of the Russian Federation of January 5, 2015 N 9 amended paragraph 11 See the text of the paragraph in the previous version 11.
CONFIRMATION OF THE SUITABILITY OF NEW MATERIALS, PRODUCTS,
STRUCTURES AND TECHNOLOGIES FOR APPLICATION IN CONSTRUCTION
Judicial practice and legislation - Decree of the Government of the Russian Federation of December 27, 1997 N 1636 (as amended on February 15, 2017) "On the Rules for confirming the suitability of new materials, products, structures and technologies for use in construction"
In order to protect the domestic market of the country from the unreasonable use of new materials, products, structures and technologies, as well as the creation favorable conditions to eliminate technical barriers in the implementation of progressive domestic and foreign achievements in construction, the Government of the Russian Federation, by Decree of December 27, 1997 N 1636, approved the "Rules for confirming the suitability of new materials, products, structures and technologies for use in construction", mandatory for federal bodies executive authorities, executive authorities of the constituent entities of the Russian Federation, state expertise and supervision bodies, legal and individuals that carry out design, construction, including reconstruction, expansion, technical re-equipment and repair of buildings and structures, production and supply of products for construction.
ABOUT THE RULES OF CONFIRMATION OF SUITABILITY
NEW MATERIALS, PRODUCTS, DESIGNS AND TECHNOLOGIES
FOR CONSTRUCTION APPLICATIONS
CONFIRMATION OF THE SUITABILITY OF NEW MATERIALS, PRODUCTS,
STRUCTURES AND TECHNOLOGIES FOR APPLICATION IN CONSTRUCTION
1. These Rules establish General requirements to check and confirm the suitability for use in construction of new materials, products, structures and technologies (hereinafter referred to as new products), the use of which in construction is not regulated by current building codes and regulations, state standards and other regulatory documents.
These Rules are binding on federal executive authorities, executive authorities of the constituent entities of the Russian Federation, state supervision, legal entities and individuals engaged in design, construction, including reconstruction, expansion, technical re-equipment and repair of buildings and structures, production and supply of products for construction.
2. New products must be suitable for use in the conditions of construction and operation of facilities on the territory of the Russian Federation.
3. The suitability of new products is confirmed by the technical certificate of the Ministry of Construction and Housing and Communal Services of the Russian Federation (hereinafter referred to as the technical certificate).
4. A technical certificate is a document authorizing the use of new products in construction on the territory of the Russian Federation, provided that they comply with the requirements specified in the certificate.
The technical certificate is issued taking into account the mandatory requirements of construction, sanitary, fire, industrial, environmental, as well as other safety standards approved in accordance with applicable law.
5. New products are subject to verification and confirmation of suitability, on which the operational properties of buildings and structures, their reliability and durability, safety for the life and health of people, their property, and the environment depend, including:
Newly developed on the territory of the Russian Federation and transferred to mass (serial) production;
Requirements for the properties and conditions of use of which are completely or partially absent in the current building codes and regulations, state standards, technical conditions and other regulatory documents;
For the first time mastered by production using foreign technologies, if it differs (in terms of materials, composition, design, etc.) from products of a similar purpose that meet the requirements of the current regulatory and technical documentation;
Manufactured according to foreign norms and standards and supplied in accordance with the requirements of these norms and standards to the territory of the Russian Federation.
New products designed in full compliance with current building codes and regulations, and designed and delivered in accordance with government standards or specifications approved in the prescribed manner.
A specific list of new products subject to verification and confirmation of suitability for use in construction is established by the Ministry of Construction and Housing and Communal Services of the Russian Federation.
6. A technical certificate is prepared on the basis of the documentation submitted by the applicant, an analysis of the results of testing new products for compliance with the conditions of construction and operation of facilities in the Russian Federation, as well as a conclusion on the suitability of new products for use in construction.
A technical certificate is issued, if necessary, if there are conclusions from the state sanitary-epidemiological and fire supervision and environmental control authorities, certifying the compliance of new products with safety requirements for the life and health of people, their property and the environment.
7. The technical certificate for new products, depending on its purpose and scope, contains:
Principal description of the product allowing identification;
Purpose and permitted scope of products;
Indicators and parameters characterizing the reliability and safety of products;
Additional conditions for the production, use and maintenance of products, as well as quality control, including by the control and supervision authorities;
List of documents (conclusions, examination certificates, test reports, etc.) used in the preparation of the technical certificate.
8. Works on verification and confirmation of the suitability of new products for use in construction, including the analysis of the results of testing new products, preparation of a conclusion on the suitability of new products for use in construction, are a service necessary and mandatory for the provision of public services to confirm suitability new products are carried out for a fee on the basis of an agreement with the applicant, a federal state institution subordinate to the Ministry of Construction and Housing and Communal Services of the Russian Federation.
The term for consideration of an application for obtaining a technical certificate for a new product should not exceed three months from the date of filing the application. At the same time, the confidentiality of information that is the subject of a commercial or industrial secret of the applicant must be ensured.
9. Bodies of state non-departmental expertise of projects and estimates and bodies of state architectural and construction supervision control the availability of technical certificates for new products used in the design and construction, as well as their compliance with the requirements of a technical certificate.
10. For the use of new products in construction without a technical certificate, the guilty persons are held liable in accordance with the legislation of the Russian Federation.
11. The Ministry of Construction and Housing and Communal Services of the Russian Federation establishes a procedure for confirming the suitability of new products in accordance with these Rules and conducts state registration issued technical certificates.
Decree of the Government of the Russian Federation of December 27, 1997 N 1636
"On the Rules for confirming the suitability of new materials, products, structures and technologies for use in construction"
In order to protect the domestic market of the country from the unjustified use of new materials, products, structures and technologies, on which the reliability, safety and durability of buildings and structures depend, as well as to create favorable conditions for eliminating technical barriers when introducing progressive domestic and foreign achievements in construction, the Government of the Russian The Federation decides:
1. Establish that new, including imported from abroad, materials, products, structures and technologies, the requirements for which are not regulated by the current building codes and regulations, state standards, specifications and other regulatory documents, can be used in construction ( including reconstruction, expansion, technical re-equipment and repair of buildings and structures) after confirmation of their suitability for use in the conditions of construction and operation of facilities on the territory of the Russian Federation.
2. Approve the attached Rules for confirming the suitability of new materials, products, structures and technologies for use in construction.
3. The State Committee of the Russian Federation for Housing and Construction Policy, within three months, submit to regulations on the construction of changes and additions arising from this resolution.
Rules
confirmation of the suitability of new materials, products, structures and technologies for use in construction
(approved by Decree of the Government of the Russian Federation of December 27, 1997 N 1636)
With changes and additions from:
1. These Rules establish general requirements for testing and confirming the suitability for use in construction of new materials, products, structures and technologies (hereinafter referred to as new products), the use of which in construction is not regulated by current building codes and regulations, state standards and other regulatory documents.
These Rules are mandatory for federal executive authorities, executive authorities of the constituent entities of the Russian Federation, state supervision bodies, legal entities and individuals engaged in design, construction, including reconstruction, expansion, technical re-equipment and repair of buildings and structures, production and supply of products for construction .
2. New products must be suitable for use in the conditions of construction and operation of facilities on the territory of the Russian Federation.
3. The suitability of new products is confirmed by the technical certificate of the Ministry of Construction and Housing and Communal Services of the Russian Federation (hereinafter referred to as the technical certificate).
4. A technical certificate is a document authorizing the use of new products in construction on the territory of the Russian Federation, provided that they comply with the requirements specified in the certificate.
The technical certificate is issued taking into account the mandatory requirements of construction, sanitary, fire, industrial, environmental, as well as other safety standards approved in accordance with applicable law.
5. New products are subject to verification and confirmation of suitability, on which the operational properties of buildings and structures, their reliability and durability, safety for the life and health of people, their property, and the environment depend, including:
newly developed on the territory of the Russian Federation and transferred to mass (serial) production;
requirements for the properties and conditions of use of which are completely or partially absent in the current building codes and regulations, state standards, technical conditions and other regulatory documents;
mastered for the first time by production using foreign technologies, if it differs (in terms of materials, composition, design, etc.) from products of a similar purpose that meet the requirements of the current regulatory and technical documentation;
manufactured in accordance with foreign norms and standards and supplied in accordance with the requirements of these norms and standards to the territory of the Russian Federation.
New products designed in full compliance with current building codes and regulations, as well as developed and delivered in accordance with state standards or specifications approved in the prescribed manner, do not require verification and confirmation of suitability.
A specific list of new products subject to verification and confirmation of suitability for use in construction is established by the Ministry of Construction and Housing and Communal Services of the Russian Federation.
6. A technical certificate is prepared on the basis of the documentation submitted by the applicant, an analysis of the results of testing new products for compliance with the conditions of construction and operation of facilities in the Russian Federation, as well as a conclusion on the suitability of new products for use in construction.
A technical certificate is issued, if necessary, if there are conclusions from the state sanitary and epidemiological and fire supervision and environmental control authorities, certifying the compliance of new products with safety requirements for the life and health of people, their property and the environment.
7. The technical certificate for new products, depending on its purpose and scope, contains:
principal description of the product allowing identification;
purpose and permitted scope of products;
indicators and parameters characterizing the reliability and safety of products;
additional conditions for the production, use and maintenance of products, as well as quality control, including by control and supervision bodies;
list of documents (conclusions, examination reports, test reports, etc.) used in the preparation of the technical certificate.
8. Works on verification and confirmation of the suitability of new products for use in construction, including the analysis of the results of testing new products, preparation of a conclusion on the suitability of new products for use in construction, are a service necessary and mandatory for the provision of public services to confirm suitability new products are carried out for a fee on the basis of an agreement with the applicant, a federal state institution subordinate to the Ministry of Construction and Housing and Communal Services of the Russian Federation.
The term for consideration of an application for obtaining a technical certificate for a new product should not exceed three months from the date of filing the application. At the same time, the confidentiality of information that is the subject of a commercial or industrial secret of the applicant must be ensured.
9. Bodies of state non-departmental expertise of projects and estimates and bodies of state architectural and construction supervision control the availability of technical certificates for new products used in design and construction, as well as their compliance with the requirements of a technical certificate.
10. For the use of new products in construction without a technical certificate, the guilty persons are held liable in accordance with the legislation of the Russian Federation.
11. The Ministry of Construction and Housing and Communal Services of the Russian Federation establishes a procedure for confirming the suitability of new products in accordance with these Rules and conducts state registration of issued technical certificates.
The resolution establishes that new materials, products, structures and technologies, including those imported from abroad, the requirements for which are not regulated by the current building codes and regulations, state standards, technical specifications and other regulatory documents, can be used in construction (in including reconstruction, expansion, technical re-equipment and repair of buildings and structures) after confirmation of their suitability for use in the conditions of construction and operation of facilities on the territory of the Russian Federation. The Rules have been approved that establish general requirements for testing and confirming the suitability of these products for use in construction. The suitability of new products is confirmed by the technical certificate of the RF Goskomstroy. New products are subject to verification and confirmation of suitability, on which the operational properties of buildings and structures, their reliability and durability, safety for the life and health of people, their property, and the environment depend. This refers to products newly developed on the territory of the Russian Federation and transferred to mass (serial) production; products, the requirements for the properties and conditions of use of which are completely or partially absent in the current building codes and regulations, state standards, technical conditions and other regulatory documents; products that are first mastered by production using foreign technologies, if it differs (in terms of materials, composition, design, etc.) from products of a similar purpose that meet the requirements of the current regulatory and technical documentation; products manufactured according to foreign norms and standards and supplied in accordance with the requirements of these norms and standards to the territory of the Russian Federation. New products designed in full compliance with current building codes and regulations, as well as developed and delivered in accordance with state standards or specifications approved in the prescribed manner, do not require verification and confirmation of suitability. The list of new products subject to verification and confirmation of suitability is established by the State Committee for Construction of the Russian Federation. These Rules also provide the procedure for obtaining a technical certificate. The term for consideration of an application for obtaining a technical certificate should not exceed three months from the date of filing the application. At the same time, the confidentiality of information that is the subject of a commercial or industrial secret of the applicant must be ensured.
Active Edition from 27.12.1997
Document name | Decree of the Government of the Russian Federation of December 27, 1997 N 1636 "ON THE RULES FOR CONFIRMING THE SUITABILITY OF NEW MATERIALS, PRODUCTS, STRUCTURES AND TECHNOLOGIES FOR APPLICATION IN CONSTRUCTION" |
Type of document | decree, rules |
Host body | Russian government |
Document Number | 1636 |
Acceptance date | 01.01.1970 |
Revision date | 27.12.1997 |
Date of registration in the Ministry of Justice | 01.01.1970 |
Status | valid |
Publication |
|
Navigator | Notes |
Decree of the Government of the Russian Federation of December 27, 1997 N 1636 "ON THE RULES FOR CONFIRMING THE SUITABILITY OF NEW MATERIALS, PRODUCTS, STRUCTURES AND TECHNOLOGIES FOR APPLICATION IN CONSTRUCTION"
Decree
In order to protect the domestic market of the country from the unjustified use of new materials, products, structures and technologies, on which the reliability, safety and durability of buildings and structures depend, as well as to create favorable conditions for eliminating technical barriers when introducing progressive domestic and foreign achievements in construction, the Government of the Russian The Federation decides:
1. Establish that new, including imported from abroad, materials, products, structures and technologies, the requirements for which are not regulated by the current building codes and regulations, state standards, specifications and other regulatory documents, can be used in construction ( including reconstruction, expansion, technical re-equipment and repair of buildings and structures) after confirmation of their suitability for use in the conditions of construction and operation of facilities on the territory of the Russian Federation.
2. Approve the attached Rules for confirming the suitability of new materials, products, structures and technologies for use in construction.
3. The State Committee of the Russian Federation for Housing and Construction Policy, within three months, to introduce amendments and additions to the regulatory documents on construction arising from this resolution.
Prime Minister
Russian Federation
V. CHERNOMYRDIN
Approved
Government Decree
Russian Federation
dated December 27, 1997 N 1636
1. These Rules establish general requirements for testing and confirming the suitability for use in construction of new materials, products, structures and technologies (hereinafter referred to as new products), the use of which in construction is not regulated by current building codes and regulations, state standards and other regulatory documents.
These Rules are mandatory for federal executive authorities, executive authorities of the constituent entities of the Russian Federation, state supervision bodies, legal entities and individuals engaged in design, construction, including reconstruction, expansion, technical re-equipment and repair of buildings and structures, production and supply of products for construction .
2. New products must be suitable for use in the conditions of construction and operation of facilities on the territory of the Russian Federation.
3. The suitability of new products is confirmed by the technical certificate of the State Committee of the Russian Federation for housing and construction policy (hereinafter referred to as the technical certificate).
4. A technical certificate is a document authorizing the use of new products in construction on the territory of the Russian Federation, provided that they comply with the requirements specified in the certificate.
The technical certificate is issued taking into account the mandatory requirements of construction, sanitary, fire, industrial, environmental, as well as other safety standards approved in accordance with applicable law.
5. New products are subject to verification and confirmation of suitability, on which the operational properties of buildings and structures, their reliability and durability, safety for the life and health of people, their property, and the environment depend, including:
newly developed on the territory of the Russian Federation and transferred to mass (serial) production;
requirements for the properties and conditions of use of which are completely or partially absent in the current building codes and regulations, state standards, technical conditions and other regulatory documents;
mastered for the first time by production using foreign technologies, if it differs (in terms of materials, composition, design, etc.) from products of a similar purpose that meet the requirements of the current regulatory and technical documentation;
manufactured in accordance with foreign norms and standards and supplied in accordance with the requirements of these norms and standards to the territory of the Russian Federation.
New products designed in full compliance with current building codes and regulations, as well as developed and delivered in accordance with state standards or specifications approved in the prescribed manner, do not require verification and confirmation of suitability.
A specific list of new products subject to verification and confirmation of suitability for use in construction is established by the State Committee of the Russian Federation for Housing and Construction Policy.
6. The technical certificate is prepared on the basis of the documentation submitted by the applicant, as well as an analysis of the results of additional tests of new products for compliance with the conditions of construction and operation of facilities in the Russian Federation.
A technical certificate is issued, if necessary, if there are conclusions from the state sanitary and epidemiological and fire supervision and environmental control authorities, certifying the compliance of new products with safety requirements for the life and health of people, their property and the environment.
7. The technical certificate for new products, depending on its purpose and scope, contains:
principal description of the product allowing identification;
purpose and permitted scope of products;
indicators and parameters characterizing the reliability and safety of products;
additional conditions for the production, use and maintenance of products, as well as quality control, including by control and supervision bodies;
list of documents (conclusions, examination reports, test reports, etc.) used in the preparation of the technical certificate.
8. Work to confirm the suitability of new products for use in construction, including the preparation and execution of a technical certificate, examination and testing of products, is carried out for a fee on the basis of an agreement with the applicant.
The term for consideration of an application for obtaining a technical certificate for a new product should not exceed three months from the date of filing the application. At the same time, the confidentiality of information that is the subject of a commercial or industrial secret of the applicant must be ensured.
9. Bodies of state non-departmental expertise of projects and estimates and bodies of state architectural and construction supervision control the availability of technical certificates for new products used in design and construction, as well as their compliance with the requirements of a technical certificate.
10. For the use of new products in construction without a technical certificate, the guilty persons are held liable in accordance with the legislation of the Russian Federation.
11. The State Committee of the Russian Federation for Housing and Construction Policy establishes a procedure for confirming the suitability of new products in accordance with these Rules and conducts state registration of issued technical certificates.
The website "Zakonbase" presents the DECISION of the Government of the Russian Federation of December 27, 1997 N 1636 "ON THE RULES FOR CONFIRMING THE SUITABILITY OF NEW MATERIALS, PRODUCTS, STRUCTURES AND TECHNOLOGIES FOR APPLICATION IN CONSTRUCTION" in the most latest edition. It is easy to comply with all legal requirements if you familiarize yourself with the relevant sections, chapters and articles of this document for 2014. To search for the necessary legislative acts on a topic of interest, you should use convenient navigation or advanced search.
On the Zakonbase website you will find the DECREE of the Government of the Russian Federation dated December 27, 1997 N 1636 "ON THE RULES FOR CONFIRMING THE SUITABILITY OF NEW MATERIALS, PRODUCTS, STRUCTURES AND TECHNOLOGIES FOR APPLICATION IN CONSTRUCTION" in a fresh and complete version, in which all changes and amendments have been made. This guarantees the relevance and reliability of the information.
At the same time, you can download the Decree of the Government of the Russian Federation of December 27, 1997 N 1636 "ON THE RULES FOR CONFIRMING THE SUITABILITY OF NEW MATERIALS, PRODUCTS, STRUCTURES AND TECHNOLOGIES FOR USE IN CONSTRUCTION" completely free of charge, both in full and in separate chapters.