Registration of a warrant for earthworks, installation of temporary fences and objects. How to open an order in forex
Legislatively, the opening of ATI warrants in Moscow is regulated by Decree of the Government of Moscow dated April 10, 2007 N 240-PP "On approval of the Regulations for the preparation and issuance of warrants for earthworks and construction work in the city of Moscow."
Registration of warrants is carried out by structural divisions of the Association of Administrative and Technical Inspections of the City of Moscow. To obtain them, applicants need to contact the “one stop shop” service of the Technical Inspectorate or the Administrative and Technical Inspectorate (ATI) by district (depending on the location of the facility and the type of work performed).
The order is issued for the following types of work:
As can be seen from the above points, it is quite difficult to figure out what type of work you need to open an order for. ProExpert experts will help you sort out this issue. Moreover, they will help to optimize and save the time frame for obtaining an order. For example: an organization intends to build a building, there is a construction project, but it has not yet passed the examination and approval. You can open an order for preparatory work and start developing the construction site, while simultaneously passing the project approval and obtaining a building permit. Then, upon receipt of all the necessary documents, open a construction order.
There are many pitfalls in urban planning legislation and all kinds of regulatory documents and regulations. ProExpert specialists will help you to correctly and quickly avoid the pitfalls in the current legislation in the field of construction.
It is also important that after the expiration of the order, it must be extended or closed. Even if you have completed the construction, but the order has not been closed, this is a violation and entails huge fines.
The list of required documents for opening an ATI Order:
- Application of the established form (filled in with the original seals and signatures of the customer and contractor)
- A copy of the permission of the commission under the Government of Moscow to consider the implementation of urban planning activities within the boundaries of places of interest and zones of cultural heritage
- A copy of the coloristic passport of the Moscow Committee for Architecture (during the overhaul of facades)
- Copy of GPZU Moskomarchitectura
- A copy of the permission of MGSN (declared work) for the production of construction and installation works (for new construction and reconstruction facilities)
- Copies of documents certifying the right to use a land plot, another real estate object: a) Lease agreement for a land plot; b) Certificate of the Moscow Property Committee for the ownership of the building; c) Lease agreement for premises, buildings, etc.
- Approved project documentation for the declared work (RD, POS and color passport for the overhaul of facades) - returned after consideration
- A copy of the construction plan, agreed in the prescribed manner, with the conclusion of the OPS for the declared work
- Certificates from operating organizations on the disconnection of engineering networks and from the balance holder on the resettlement of residents and the withdrawal of organizations (in case of demolition of buildings and structures)
- A copy of the Permission of Geonadzor of Moscow for engineering and geological surveys and drilling of wells
- A copy of the Permission of the Moscow Architecture Committee for reconstruction work
- A copy of the Permission of the Department of Cultural Heritage to conduct pre-project, archaeological surveys, emergency recovery work, (including partial development) on objects of architectural monuments
- Specifications for the connection of engineering networks (for the objects of laying and rebuilding networks to existing buildings and structures)
- Permission of the State Unitary Enterprise "Moskollektor" (during work, existing collectors)
- Executive documentation (executive scheme) for a previously laid route
- Conclusion of the PEP Department on the project, logging ticket (if there are green spaces)
- Permission to transplant green spaces (if green spaces are available) of the PEP Department
- Project documentation agreed with the Department of Transport and Road Infrastructure Development of the City of Moscow, State Unitary Enterprise "Mosgortrans" and the UGIBDD of the Main Department of Internal Affairs of Moscow (returned after consideration)
- PPR for the declared work, agreed and approved in the prescribed manner, including by the territory's balance holder. UNDER when working on the roadway; conclusion of the State Traffic Safety Inspectorate, State Unitary Enterprise Mosgortrans (1 copy is to be returned to the applicant)
- Investment contract (agreement) for the implementation of investment projects in Moscow and an agreement between the investor and the customer and the general contractor (if any)
- Contract agreement (customer and Contractor) and SRO of the Contractor and technical customer
- Contract for subcontract work with self-regulatory organizations of subcontractors (if they are involved)
- Scheme of the construction site, with reference to the terrain and explication of the situational plan, indicating the boundaries of the work site, places for storing materials and waste, placement of a residential camp, installation of information boards, signs, emergency lighting, wheel washing points, etc.
- Work schedule agreed by the customer and approved by the head of the contractor (1 copy for the order form)
- Builder and Technical Customer ID Card (including full bank details), Contractor ID Card (including full bank details), Subcontractor ID Cards (including full bank details)
It is worth noting that the receipt of one or another of the above documents requires the receipt and approval of many other documents.
Electronic Services
Full service name
Registration of warrants (permits) for excavation, installation of temporary fences, placement of temporary facilities in the city of Moscow
Conditions for obtaining services on the site
Who can apply for the service:
Legal entities
Legal entities that are customers of earthworks, installation of temporary fences, placement of temporary facilities
Individual entrepreneur
Individual entrepreneurs who are customers of earthworks, installation of temporary fences, placement of temporary facilities
Service cost and payment procedure:
Is free
List of required information:
Form of an interactive application for the provision of public services for issuing an order (original, 1 pc.)
- Required
- Provided without refund
Terms of service provision
13 working days
The result of the service
Issued:
- Order (permit) for excavation, installation of temporary fences, placement of temporary facilities (original, 1 pc.)
It is sent in the form of an electronic document, signed in the prescribed manner, to the applicant's "personal account" on the Portal.
- Order (permit) for excavation, installation of temporary fences, placement of temporary facilities (original, 1 pc.)
Receipt Forms
On the WEB site
- order buy- click Shift+B
- order Sell- click Shift+S
- order buy with stop loss and take profit - click Ctrl+Shift+B
- order Sell with stop loss and take profit - click Ctrl+Shift+S
- Icons in the form of lines are responsible for opening orders without stop loss and take profit.
- The icons that are in the center open orders from stop loss and take profit.
- On the left side - the icons are responsible for the purchase (buy). They are colored in shades blue colors.
- On the right side - the icons are responsible for the sale (Sell). They are colored in shades red colors.
- In the middle line - icons for opening market orders ( buy and Sell ).
- In the top line - icons for opening pending orders placed above the market price ( buy stop and Sell Limit ).
- In the bottom line - icons for opening pending orders placed below the market price ( Buy Limit and Sell Stop ).
- If you try to place a pending order too close to the limit price (closer than the value
Grounds for refusal to provide services
1. The grounds indicated for refusal to accept documents, if these circumstances were established in the process of processing documents and information necessary for the provision of public services.
2. Impossibility of performance of works in the declared terms.
3. Non-compliance of the types of fences specified in the project for the conduct (production) of work with the types of fences approved by the Government of Moscow as an annex to the Rules for excavation, installation of temporary fences, placement of temporary facilities in the city of Moscow.
4. Non-compliance of the project of carrying out (production) of works with the requirements established by the Government of Moscow.
5. Failure to eliminate violations committed during excavation, installation of temporary fences, placement of temporary facilities.
6. Failure to pay a fine in accordance with the established procedure in connection with violations committed during excavation, installation of temporary fences, placement of temporary facilities.
Grounds for refusal to accept documents
1. Submission of documents required for the provision of public services that do not meet the requirements established by the legal acts of the Russian Federation, legal acts of the city of Moscow, the Administrative Regulations for the provision of public services of the city of Moscow "Issuance of orders (permits) for earthworks, installation of temporary fences, placement of temporary facilities in the city of Moscow.
2. Submission of documents that have become invalid in cases where the validity period is established in such documents or provided for by the legislation of the Russian Federation, legal acts of the city of Moscow.
3. Submission of an incomplete set of documents and non-submission of information specified in paragraph 2.5.1.1 of the Administrative Regulations for the provision of public services of the city of Moscow "Issuance of orders (permits) for earthworks, installation of temporary fences, placement of temporary facilities in the city of Moscow".
4. The presence of conflicting information in the interactive application and the documents attached to it.
5. Submission of an application on behalf of the applicant by an unauthorized person.
6. Application for the provision of a public service by a person who is not a recipient of a public service in accordance with this Regulation.
7. Application for the provision of a public service not provided by OATI.
8. Incorrect filling of required fields in the interactive application form.
9. The applicant's application for the provision of public services with an application on paper after the expiration of the period established by paragraph 1.4 of the Administrative Regulations for the provision of public services of the city of Moscow "Issuance of orders (permits) for earthworks, installation of temporary fences, placement of temporary facilities in the city of Moscow".
10. The application and other documents are signed using an electronic signature in violation of the requirements of regulatory legal acts of the Russian Federation and legal acts of the city of Moscow.
11. The submitted electronic copies of the documents required for the provision of public services are unreadable and (or) do not meet the requirements for the formats for their provision established by paragraph 2.5.5 of the Administrative Regulations for the provision of public services of the city of Moscow "Issue orders (permits) for earthworks , installation of temporary fences, placement of temporary facilities in the city of Moscow".
For inquiries regarding the service, please contact:
Moscow, Centralnaya, 6
Moscow, Taganskaya, 30/2, building 3
For an experienced trader, the questions of beginners seem at least naive, but we all took our first steps in Forex at one time. One of these steps is opening and closing an order in the trader's trading terminal.
How to open a forex order correctly? – But such a seemingly simple question, there are quite a few answers, it all depends on your trading strategy and the capabilities of the terminal.
Each of them has its positive and negative sides, which can be revealed only with a detailed study.
How to open an order.
In addition to purely technical issues, market entry points should also be taken into account, this is an equally important moment of trading, since the financial result of the transaction directly depends on it, a detailed description of these points is given at the link above.
If we touch on technical issues, then you can open a forex order:
By pressing the F9 key - when the trading terminal is running, after that a window with additional parameters will appear, which we will discuss below.
Click the New Order tab at the top of the screen.
By right-clicking on the selected trading instrument in the quotes window, a submenu will open, in which we select the first line.
Volume - the size of the position being opened, a rather difficult question, since you need to correctly calculate the ratio of the deposit and the lot. A detailed description of how to solve this problem can be found in the article "Forex lot size".
Stop loss and take profit are indicators of stop orders, which are the main means of regulating the size of losses and profits. It is recommended that the stop loss parameter does not exceed 5% of the deposit amount, and the take profit is at least twice as large for the stop loss.
Type - if you want the transaction to open immediately, select "Immediate execution", in the same case, if it is planned to open as soon as the price reaches a certain level, select "Pending order". How this is done is described in the article "Placing pending orders".
Maximum deviation - if you often receive messages that the price has changed and the order cannot be opened, these are the so-called requotes, you can deal with them by setting a permissible deviation from the quote price. That is, we put a bird in the “use deviation” box and then set the number of points, it is recommended from 2 to 5.
Sell and Buy - the choice between selling or buying a trading instrument, by clicking Sell you open a deal to sell, and when choosing Buy you buy a currency pair.
After you have found one of the keys, an order is placed directly on Forex, information about it appears in a separate window, which indicates the size of the open position, its direction and parameters
Because the opening market and pending orders- one of the most popular operations in trading, the AutoGraf 4 application provides a number of advanced features. You can open an order (market) with hotkeys and set a pending order mouse, simply by dragging the line to the desired price on the chart.
How to open a market order
There are 2 ways to open market orders using the AutoGraf 4 application.
Method 1. Through hotkeys.
To open:
Clue! If the hotkeys do not work, you may have disabled the option in the terminal "Allow DLL import".
You can enable this option as follows: Tools -> Settings -> Expert Advisors -> Allow DLL import.
Method 2. Using the mouse.
For this you need:
1. Select the market order icon of the desired type on the Toolbar.
2. Grab the icon with the mouse and drag it outside the panel to any place on the chart.
Since a market order is opened at the current market price, the price and time coordinates where the badge was released do not matter.
In both cases, the number of lots for which an order will be opened is equal to the current value of the Lots parameter on the Control Panel.
How to open a pending order
To open a pending order, necessary:
1. Select the order icon of the desired type on the Toolbar.
2. Grab the icon with the mouse and drag it at the desired price on the chart.
The number of lots of the order will be equal to the current value of the Lots parameter on the Control Panel.
How to navigate the icons
How to open an order? To do this, use the icons located at the top of the Toolbar.
Let's consider them in more detail:
In order to quickly and easily navigate the icons on the panel, you should understand the principle of their location:
Settings
It has already been mentioned above that the parameters that are used when opening orders are located on the Control Panel.
Before opening an order, you need to set up number of lots to which it will be open.
This can be done in two ways:
1. Set the value of the Lots parameter on the Control Panel, or
2. Set the amount of Interest from free funds.
If the order is opened from stop loss and take profit, then you also need to set the distance from the stop loss and take profit to the limit price . To do this, you need to set a new value for the SL and TP parameters on the Control Panel.
Interaction with the StopLevel corridor
Before sending a trade request to open an order, the AutoGraf 4 application analyzes the minimum distance corridor (StopLevel):
Need to know, how to open a deal (order) in the MT 4 terminal and how to fix the profit afterwards.
"Stop loss" (loss limit) and "Take profit" (profit fixation) - fields for entering the values of the corresponding limit orders.
"Comment" - here you can specify any comment for yourself on this transaction, so that later it can be viewed in the account history. But usually the field is left blank.
"Type" - order execution type. It has two meanings: immediate execution and pending order. Working with pending orders will be discussed in a separate article. Let's focus on immediate execution, that is, we need to open a Forex trade at current prices.
These prices are just displayed below the corresponding buttons: the purchase price is located above the Buy button (buy), the sale price is located above the Sell button (sell). Quotes change in real time.
“Use the maximum deviation from the price” - this function is needed in order to avoid requotes at times of high volatility in the market. If we tick this function and specify the desired value, we can be sure that the order will still be executed automatically, even if the price at this moment “deviates” from the specified level by several points (within the specified value, no more). In this case, the broker will not offer new prices and we will not have to waste time confirming or rejecting the order.
as we wanted open a deal at the market price, after all the fields have been filled in with the necessary data, click on Buy or Sell.
After the transaction is executed, the result of processing the order will appear.
The order number, transaction type (Buy or Sell), volume, trading instrument, order opening price will be indicated. Click OK.
If you haven't used the Price Rejection feature, then you may be offered new prices if the market is changing rapidly at that point. In this case, instead of the result of opening a deal, you will see an additional window where it will be said that new prices have arrived. You will need to agree or refuse to make a transaction at the proposed values. Requotes can go one after another several times, you need to be prepared for this.
We see the result of opening a deal in the "Terminal" window in the "Trade" tab.
How to close an order and take profit on an open trade
Once the chart has reached the desired level, you can close the position at a profit. You can also close the order at a loss at the current market price. To do this, right-click on the order you want to close, select "Close Order" from the menu.
The order window will appear, where the parameters for closing the transaction will be indicated on the yellow long button: order number, transaction type, lot size, trading instrument, closing price (current). If the price suits you, you need to click on this button "Close ..."
After processing the order, the result will be displayed: order number, trade type, lot size, trading instrument, opening price, lot size of the closed position and closing price. Click OK.
Important! In some trading terminals of a different type, to close an open order, you need to make an additional opposite deal with the same parameters. If you have previously traded on similar trading platforms, be careful: in MetaTrader, you do not need to open additional deals to fix the result, the program independently determines the direction of an open deal and automatically makes the opposite one. You can’t see it, but all you need to do is click on the “Close…” button.